Tuff Stuff Standard Set Abrasion Resistant Epoxy Paste

Wear Protection Products

epoxy-paste-abrasion-resistantCalyco are a mining and related industry Abrasion Resistant Epoxy Coatings and Epoxy Paste Suppliers.

Calyco Tuff Stuff FS Trowellable Heavy Duty Abrasion Resistant Epoxy Coating Paste is a two-component epoxy compound reinforced with a fibre resin system possessing excellent adhesion, good mechanical properties and quick curing for emergency repairs to a variety of equipment.

This fast cure epoxy system allows for quick return to service of equipment when downtime is limited. Tuff Stuff Abrasion Resistant Epoxy Coating Fibre Resin Epoxy Paste will bond to steel, wood, ceramic, fibreglass and concrete. Typical use includes repair to cracked pressure pipes, ducts, pumps, valves and tanks.

Abrasion Resistant Epoxy Surface Preparation:

The surface should be free of all foreign matter such as dirt, oil, loose particles, rust and other contaminates. The substrate surface should be abraded by hand or mechanical method of preparation such as grinding, abrasive blasting, HP water method, scarifying and the like to obtain a good surface profile of 70-75 micron finish for bonding.

Abrasion Resistant Epoxy Mixing and Application Information:

Tuff Stuff Fibre Resin Epoxy Paste is a two pack 100% solids epoxy system, which has a paste like consistency when mixed. This enables the mixed material to be applied up to 5mm build at a time. The two components should be placed on a mixing board and mixed using a spatula or trowel until a uniform grey colour is obtained. The mixed epoxy is now applied using a trowel or spatula. In bonding applications the two surfaces are now mated together with clamping if required and allowed to cure. Differences in cure time will arise due to volume of material mixed, thickness of application and ambient temperatures. The cure process may be accelerated by heating components up to 40°C or allowing mixed product to stand for a short time prior to use.

Tuff Stuff Fibre Resin Epoxy Profile:


Colour Black/Grey
Mix Ratio 100:0.50 (Non Dangerous Goods Item)
Pot life minutes @ 20°C 45 minutes
Cure 5mm @ 25°C 4.0 hours
Ultimate cure @ 25°C 12 hours
Kit size 7.2 & 3.1kgs (other kit sizes available on request)


Tuff Stuff Abrasion Resistant Fibre Resin Epoxy Paste is recommended for applications such as Pumps, Pipes, Chutes, Tanks, Bins, Ducts, Valves and Fibreglass repair.


Abrasion resistant, easy to apply, free of all solvents, fast emergency repairs and high mechanical strength.

Over the last five years our mining equipment supplies business has been primarily focused on Wear Protection. We manufacture and supply through distribution Tuff Stuff Abrasion Resistant Epoxy Coating Paste New Zealand-wide. We also provide our industrial and mining clients with superior wear, corrosion and shock resistance solutions. Combine this with sourcing and related wear protection services and you're sure to experience complete customer satisfaction!

Calyco is taking a leadership position in the area of environmental protection and Occupational Health and Safety. Our Mining, Quarry and Industrial Equipment Supplies Company in New Zealand is justifiably proud of our record for professional service and encourages you to consider buying Abrasion Resistant Epoxy Coating Paste from us!

> Make your Tuff Stuff Abrasion Resistant Epoxy enquiry or request a quote now!

> pdf Download (272kb) the Calyco Tuff Stuff Trowellable Heavy Duty Abrasion Resistant Epoxy Coating Paste Technical Data Sheet NOW!

Wear Protection Epoxy Paste Suppliers of Abrasion Resistant Epoxy Coatings - Calyco Mining, Quarry and Industrial Equipment Supplies.

Back to top